top of page

The Olympus Hercules All-Welded locker is perfect for any corridor where extreme durability is the main concern. With all welded construction, corridor ventilation designs, and many standard or optional features to choose from,  the Hercules locker will be the right choice.

Edina High School

Edina, MN

Weaver Lake Elementary

Maple Grove, MN

Delano Intermediate School

Delano, MN


Doors: 14 gauge cold rolled mild steel with an 18 gauge full height welded door stiffener

Available with standard louvers, solid door face or mini louver venting

4 Sided door strike


Body: 16 gauge cold rolled steel top, bottom, shelf, back, side panels, and tier dividers


Hinges: 16 gauge continuous piano hinge

Latch: 3-point recessed gravity finger lift, single point, or 3-point/3 side cremone style turn handle latch mechanism

Finish: 2-3 mil thick powder coat. Matching interior and exterior color

Sizes and Colors

Standard Available Sizes:

Width               Depth                    Overall Height

12"                    12"                         36" (Single Tier)

15"                    15"                         48" (Single Tier)

18"                    18"                         60" (1-5 Tiers)

21"                    21"                         72"

24"                    24"                         72"

Other Sizes and Configurations are Available Upon Request

COLOR CHART - 2022[74733].png


Material: All parts to be made from prime grade mild cold rolled sheet steel (unless indicated otherwise) free from surface imperfections and capable of taking on a powder coat finish


Finish: Steel shall be cleaned with phosphatizing and metal preparation process. Finish coat shall be baked on powder coat enamel with 2-3 mil minimum of thickness. Color to be selected from manufacturers standard offering. All lockers are painted inside and out with the same color


Construction: Lockers shall be all-welded construction, welded into banks of multiple lockers sharing common backs, tops and bottoms.

welding of knock down style lockers is not acceptable.


Door Frame: The locker sides, tops, bottoms, and tier dividers are to be formed, creating the door frame with continuous 4-sided door strike. The side panel and vertical frame member shall be a single piece, eliminating seams. Lockers without 4 sided door strike shall not be acceptable. Intermediate frame members of two and three tier lockers shall be securely welded to the vertical frame members.

Doors: All doors to be formed from one piece 14 gauge steel with a single return at the top and bottom, double return on the sides to form a channel. Channel to be sufficient to fully conceal the lock bar. An 18 gauge full height door stiffener, welded to the inside of the door on the hinge side shall be provided on all doors 20" and higher.

Vents: Lockers 36" and higher have 2 sets of louvers, one set at the top of the door and one set at the bottom of the door. Lockers with doors 30" or less shall have a minimum of one set of louvers. (other venting options are available)

Latch: Provide handles recessed in door with finger lift control. Latch system contains a lock bar installed inside the formed channel of the door. For doors 42" high or greater, lock bar secures door closed via contact with 3 heavy gauge steel latch hooks. Doors that are less than 42" utilize 2 latch hooks. Latch hooks shall be securely welded to the vertical frame channel. Nylon guides and clips prevent metal to metal contact for a quieter operation. Lock bar shall connect to 14 gauge steel lift piece with one secure retaining lug and one rivet, assuring positive 2 point connection. The exposed portion of the finger lift shall be encased in molded ABS thermoplastic to prevent metal to metal contact. Latch system shall accept either a padlock or built-in combination style lock. Box Lockers are equipped with a single point style latch if it is 4 tiers and above.

(Optional) Single point latch is optional on all lockers. An 11 gauge steel hook shall be securely welded to the vertical frame member. Frame hook will have a padlock hasp that protrudes through the stainless steel recessed handle. The frame hook shall be designed to accept the Masterlock 1690 built-in combination lock. Or a 3-point/3 side cremone turn handle latch mechanism.

Body: All locker body components shall be made of 16 gauge cold rolled mild steel, specifically formed for added strength and rigidity. The front edge of the shelf shall have a double return flange. Tops and bottoms of lockers shall be one piece, continuous within each group of lockers. 

Lockers 60" and 72" high include a hat shelf, two single side hooks and one single back hook. Lockers 48" and less do not come standard with a hat shelf.

Hinges: 16 gauge steel continuous piano hinge

bottom of page